Fliegl Flatbed Semitrailer v1.0.3.0
Fliegl Flatbed Semitrailer v1.0.3.0
Price: 28.000 $
Category: Bale Loaders
Slots: 11
V1.0.3.0:
Extended support for more bale sizes from the supported mods
Added Sounds when attaching and deattaching
Added pallet autoload
Removed dynamicMountAttacher
Fixed HUD icons
V1.0.2.0:
Added variant with smaller load area
Added Steering axle
Revised tension belt position
Revised bale position and capacities
Other vehicles and equipment now spawn closer to the trailer at the vehicle dealer
Added autoload working mode (size of bale trigger)
Number plate position is now dependent on the trailer hitch
Bale capacity selection removed (is now automatically set) (*)
Added support for “Selectable Bale Capacity Pack” mod
Added support for “Universal Autoload” mod (PC/MAC only)
Notes:
(*) Depending on the selected configuration, the trailer needs to be reconfigured once.
V1.0.1.0:
Fixed display of control icons in info help window
Fixed warning regarding missing setting in the configuration file fixed
Fixed collision in front
Fixed issue where AI traffic did not pass the trailer
Added support for 120cm x 130cm Hesston bales
Features:
Autoload for round (125-180cm, 22-34 bales) or square (180-240cm, 16-42 bales) bales.
Autoload for pallets (3x 20,000 – 3x 30,000 Liter; all palettes that are set up by default)
Ppallets autoload Platinum and Premium Expansion ready
Different working modes for bale and pallet autoload
Choice of colours for rims, semitrailer and flatbed
Fliegl logo (rear) selectable in white, red and black
Rear trailer hitch
Number plate
Sounds when attaching and deattaching the trailer
Tyres (Continental, Trelleborg, Michelin, BKT, Vredestein)
Supports Hesston Bales of the Hesston Balers mod
Supports “Selectable Bale Capacity Pack” mod
Supports “Universal Autoload” mod in autoload configuration “standard”(PC/MAC only)
Function:
Bales: First bring the trailer into the working position, the bales can now be collected. After collecting, return the trailer to the transport position.
To unload, select the unloading place via the unloading mode and unload the bales. After unloading, stop the unloading process.
If the bales are unloaded onto the platform, they can then also be moved manually e.g. by a front loader.
With the working mode, the autoload can be set to either collect the bales from the field or to put them onto the platform before the autoload collects them.
Pallets: There are several loading areas to load different pallets. Each loading area has its own marked loading zone. This marking can be switched on and off.
The loading zone trigger can be adjusted in height to detect the different unloading triggers of the pallets.
Loading starts automatically when a pallet is detected in the loading zone or loading can be started manually for each pallet individually.
With the work mode, the autoload can be set whether the pallets are detected next to the trailer or have to be brought over the platform.
Notes:
The bales can be unloaded to the side and to the rear and rotated in all directions. If in working or transport mode the bales are shifted on the platform, changing the mode is sufficient to correct the position.
Autoload only works if this is configured in the garage. For the “Universal Autoload” mod, please select “Standard” as the autoload configuration.
If the trailer is configured with bales in autoload mode, these are then “locked” for further processing. Simply unload the bales onto the trailer, configure again and the bales can be used again. The same also works if the bales get “stuck” after loading a savegame.
